參考價格
面議型號
100185品牌
先豐納米產地
江蘇樣本
暫無制作方法:
.質量標準:
.純度:
99%目數:
90nm品級:
一級看了Graphene Supermarket 二硫化鎢納米片的用戶又看了
虛擬號將在 180 秒后失效
使用微信掃碼撥號
貨號 | CAS號 | 編號 | 包裝 | 參數 |
100185 | 12138-09-9 | XF062 | 5 g | 純度99wt% 平均粒徑90nm |
產品名稱 中文名稱:Graphene Supermarket 二硫化鎢納米片 英文名稱:Tungsten Disulfide Nanoplatelets
性質 Purity: 99.0% 純度 Average Particle Size: ~90 nm 平均粒徑90nm Specific Surface Area: ~30 m2/g 比表面積 Bulk Density: N/A True density: 7.50 g/cm3 堆密度
應用 Transparent and Flexible Electronics Transistors Composite Materials Chemical and bio-sensors Semiconductor printable inks
其他信息 WS2 Ultrafine Powder is ideal for creating WS2 solutions with applications ranging from electronics to energy storage. The powder may be sonicated in a range of liquid solvents, whereas the longer sonication takes place, the smaller the flake size in solution. Further, before sonication the solution will be silvery, and after it will turn a greenish-yellow. The solvents useful during sonication include benzyl benzoate, isopropanol, acetone, methanol, and many others. The liquid dispersion may then be used to create a thin film on the substrate of your choosing. These thin-films have a range of applications, such as transistors, solar cells, and energy storage devices. WS2 solution can also be used in composite materials. The difference between our micropowders and ultrafine powders are their flake sizes. Ultrafine powders have smaller flakes, and create dispersions with smaller particle sizes after sonication than micropowder. Micropowders require more sonication and will result in flakes with larger lateral dimensions. Micropowder is a low-cost alternative to our ultrafine powder.
WS2 Ultrafine Powder SEM image
|
暫無數據!
評論人:重慶大學 邵一前文章內容概述本研究基于同軸濕法紡絲技術,成功構建了具備梯度導電網絡結構的芯-護套型碳納米管復合纖維(CNT@Ni-CNT),并將其進一步織造成柔性多功能智能織物,兼具高性能應變
評論人:上海大學 宋永騰文章內容概述骨缺損修復是一個復雜的多階段生理過程,涉及早期血管生成和后期成骨的耦合,且常因感染而變得復雜,因此該過程仍然是一個重大的臨床難題。盡管功能性載藥工程支架有望解決這一
核殼復合納米材料是將一種或多種納米粒子材料包覆在其他納米粒子上所形成的有序組裝納米復合材料,其能夠兼具外殼和內核材料的優良特點,將內外兩種材料的特性復合,克服單一結構材料性能的不足,從而提高材料的光、
為了使石墨烯材料獲得更加廣泛的應用,功能化改性處理一直都被作為一個研究熱點而被廣泛深入研究。氮原子摻雜是一種既能保持納米石墨烯π體系完整性,同時又能顯著調控其物理化學性質的有效策略。氮原子具有比其它無
單原子催化在過去十年中引起了廣泛關注。由于其獨特的活性位點結構,單原子催化在熱催化、電催化和環境催化等許多體系中表現出超高的原子利用效率和獨特的催化活性和選擇性。本期小豐整理了3篇單原子催化劑近期發表